Products tagged with 'Melbourne'

Slip-on Forklift Carpet Poles convert a standard forklift truck into a specialist handler suitable for fabric, carpet, cable and coil products eliminating manhandling of a heavy, unstable product. The Slip-on Forklift Carpet Pole quickly adapt to almost any forklift and require only the connection of a safety chain to prevent unintentional disengagement.

The 8000 Kg container ramp design is primarily used for bridging a forklift from standard ground level into a standard shipping container. Container ramps are designed specifically to match the height of a container and allow entry and exit of forklifts carrying heavy loads. They prevent damage to your forklift and the ground by attempting to bounce your forklift up the container lip. They are also useful where products on wheels need to be moved in and out and can be located at any door opening.

Forklift container ramp (Fixed) made super tough to safety standards. Fixed forklift container ramps designed to access shipping containers to your requirements. 160cm x 200cm x 17cm, Treadplate Deck, Safety chains included, Compliance Plate, 12 Month Warranty. Stock Sydney, Melbourne, Brisbane, Adelaide and Perth

EW-CR7 forklift container ramp is our ramp for people on a budget - our no frills ramp! 7000kg capacity with Stock in Sydney, Brisbane, Perth and Melbourne

The EW-FJ-TOWS Forklift Tow Jib Attachment is a dual purpose, lightweight and simple to use forklift attachment which allows towing with the attached 50mm towball, and doubles as a 2000kg WLL lifting jib complete with 2T safety swivel hook. Includes two lifting hook positions and utilises two fork locking pins to secure the jib to the forks during operation.

EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity s designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Stock available Sydney, Brisbane, Melbourne and Perth

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in Sydney, Brisbane, Melbourne, Adelaide and Perth to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in Sydney, Brisbane, Melbourne, Adelaide and Perth to suit any forklift

Equipment Warehouse offers a complete range of fork slippers/fork extensions with stock on the ground in Sydney, Brisbane, Melbourne, Adelaide and Perth to suit any forklift

Equipment Warehouse offers a complete range of fork slippers / fork extensions with stock on the ground in Sydney, Brisbane, Melbourne, Adelaide and Perth to suit any forklift.

Equipment Warehouse offers a complete range of fork slippers/fork extensions with stock on the ground in Sydney, Brisbane, Melbourne, Adelaide and Perth to suit any forklift

Equipment Warehouse offers a complete range of fork slippers / fork extensions with stock on the ground in Sydney, Brisbane, Melbourne, Adelaide and Perth to suit any forklift.

Equipment Warehouse offers a complete range of fork slippers / fork extensions with stock on the ground in Sydney, Brisbane, Melbourne, Adelaide and Perth to suit any forklift.

The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. Stock Sydney, Brisbane, Melbourne and Perth

The EW-SC1 forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble. Same day pick up available Brisbane, Sydney, Melbourne, Adelaide and Perth.

The EW-SCF folding safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble with stock Sydney, Brisbane, Melbourne and Perth

The EW-SCZAP zinc forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble. In Stock Sydney, Brisbane, Melbourne and Perth

The EW-WP-MSF forklift safety cage has wire mesh sides and is shipped flatpacked so is very cheap to freight and is very easy to assemble.

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in Sydney, Brisbane, Melbourne, Adelaide and Perth to suit any forklift

The EW-FS25-M Fork Spreader is designed to safely lift extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting and timber. In Stock Melbourne.

The type EW-SFJCS100-M Fixed Jib (Short) is designed as an affordable general purpose Jib able to move in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been designed with wide pockets suitable for Forklifts with special hydraulic Tine Positioners. This slip-on Forklift attachment is held to the Forklift by a safety chain. The Jibs overall length when closed is 1.39 metres.Supplied with safety swivel Hook and Shackle. In Stock Melbourne.

The EW-IJS25 Incline Jib 2.5 Ton Short allows for additional height, compensating for length of the hook and slings when lifting. The jib boom can be set at 3 angled positions as well as level. This jib also offers 5 different hook positions with a 2 metre maximum reach. Manufactured with a Hot Dip Galvanized Finish, they are supplied with a Safety Swivel Hook and Shackle.

The EW-FJERJL45 Low Profile Forklift Jib is an affordable general-purpose jib. It has a low profile design, with a 3.4 metre reach when fully extended, allowing for long reach lifts. The jibs overall length when retracted is 2.0 metres. The standard finish on this unit is Hot Dip Galvanized Finish. Supplied with safety Hook and Shackle. In Stock Melbourne.

The Rigid Jib 4.75 Ton Long is an affordable general purpose jib. It is maneuverable in confined spaces with the ability to extend out to 3.5 metres when fully extended. Manufactured with a Hot Dip Galvanized Finish, they are supplied with a Safety Swivel Hook and Shackle. In Stock Melbourne.

The EW-RJS475 is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. Simply slide onto the Fork Tines and secure with safety chain. The standard finish on this unit is Hot Dip Galvanized Finish. Supplied with Hook and Shackle. In Stock Melbourne.

EW-CR7 forklift container ramp is our ramp for people on a budget with 7000kg capacity and Stock in Sydney . Pickup Noble Park warehouse or delivery available Melbourne metro and across VIC

EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity s designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Stock available Melbourne Noble Park warehouse and VIC regional delivery available

2 x lifting positions, Slim line allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Sydney , Brisbane, Melbourne and Perth.

Forklift jib attachment with 2 x lifting positions, Slim line allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Melbourne Noble Park warehouse.

The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. In stock Melbourne Noble Park warehouse or VIC delivery available

Forklift Spreader Bar 3000mm with load guard is perfect for safely picking up long products such as plasterboard, roof sheeting, timber, plaster tubing etc with flat rate shiping to Sydney, Brisbane, Melbourne, Adelaide and Perth

The EW-SC-C Collapsible zinc forklift safety cage / folding forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble and can then be packed up again when finished and stored

This forklift container ramp (fixed) has been designed with a fixed frame as an alternative to our bi-fold ramp. The unit is fitted with pockets on each side to allow side shifting to the container door access. It is supplied in a red enamel finish with locking chain and hook to attach to container. 1500 mm fixed container ramp.

This long forklift container ramp (fixed) has been designed with a fixed frame as an alternative to our bi-fold ramp. The unit is fitted with pockets on each side to allow side shifting to the container door access. It is supplied in a red enamel finish with locking chain and hook to attach to container. The 1800mm has been particularly designed to enable pallet trucks access to standard shipping containers.

Forklift Container Ramp (folding) is designed in a unique way to access standard shipping containers using a bi-folding container ramp. It allows the forklift operator to approach the container straight on, with fork pockets under the main body of the ramp. Once in position the small ramp section is folded over to form a full ramp section approx. 2100mm long.

Shipping container wheels / castors allows you to easily move a shipping container on flat surfaces. Connects directly to the bottom corners of your shipping container. Each has a 2 tonne WLL so giving a combined 8 tonne WLL when using four castors

This forklift attachment is a slip on style unit that has two hook locations with 3200Kg load capacity and gives the operator a 569/1174mm load point from the forklift carriage face. The second function of the Forklift Towball Jib allows the towball fitting to assist with the movement of standard hitch trailers with a maximum ball load weight of 10% of the capacity or 300Kgs dead weight at hitch point.

These container ramps are designed to provide easy access to shipping containers to facilitate efficient unloading of product. All container ramps / loading ramps have convenient fork pockets to allow easy movement around your site.

These 20 ton heavy duty truck ramps are suitable for cement, dump, garbage and most heavy trucks.